Preparing The Installation Niche - Miele KWT 2601 Vi Operating And Installation Instructions

 Do not remove the installation aids 
from the door of the wine condition-
ing unit. These will be required later
when the wine conditioning unit is in-
stalled in the niche.

DANGER of tipping over!
Please bear in mind that the wine
conditioning unit is no longer se-
cured to the pallet!
 Unscrew the brackets  that are fix-
ing the wine conditioning unit to the
delivery pallet.
Installing the wine conditioning unit
 With the help of several people as re-
quired, carefully lift the wine condi-
tioning unit from the pallet, starting
with the back of the wine condition-
ing unit.
The wine conditioning unit can be rolled
along the floor using the wheels at the
back.

Preparing the installation niche


tioning unit closed until the appliance
is secured inside the niche!

The installation niche must be se-
cured to the wall behind it with sev-
eral screws. Only this can ensure that
the wine conditioning unit will not tip
over after being installed!
Always use the provided anti-tip
brackets to secure the niche.
Due to the sheer size and weight of
the wine conditioning unit, it needs
to be ensured that it cannot tip for-
wards once it is built into the niche.
Using the installation equipment
Parts required for installation of the
wine conditioning unit are supplied
with the wine conditioning unit. The
plastic bags supplied are marked with
letters for easy identification.
 When performing the individual as-
sembly steps, observe the letters
specified and use the matching plas-
tic bag with the required installation
equipment.
Keep the door of the wine condi-
Risk of tipping over!
25