Before First Use; Using The Wine Conditioning Unit - Miele KWT 2601 Vi Operating And Installation Instructions

Before first use

Before first use
Allow the wine conditioning unit to
stand for approx. 1 hour prior to con-
necting it to the power supply.
This will help prevent any malfunc-
tions.
Packaging material
 Remove all packaging material from
the inside of the wine conditioning
unit.
Leftover tape residue.
Always remove all packaging mate-
rial, including adhesive tape, before
switching on the wine conditioning
unit.
Cleaning
Please refer to the relevant instruc-
tions in "Cleaning and care".
 Clean the inside of the wine condi-
tioning unit and the accessories.
54
Using the wine conditioning
unit
The touch display can be scratched
by pointed or sharp objects, e.g.,
pens.
Only touch the display with your fin-
gers.
If your fingers are cold, the touch
display may not react.


52 52
°F
°C
 

The symbols underneath the tempera-
ture display can be selected directly by
touch; the symbols and text in or above
the temperature display can only be
displayed.
... in settings mode 
 Touch the symbol  to open settings
mode.
 Use the arrow buttons  and  to
select the function whose settings
you wish to adjust.
 Confirm your selection with OK.
 Adjust the settings using either the
arrow buttons  and  or sensors 
and .
 Confirm your selection with OK.
The setting with the colored back-
ground is always the selected setting;
it can be confirmed directly with OK.

52
-18
°F
°C
°F
 


°F
