To avoid damaging the wine condi-
tioning unit, the ventilation grille must
be positioned precisely in front of the
vent outlet. If you wish to fit a plinth
facing across the front of the wine
conditioning unit make sure it
provides adequate ventilation.
The filler panel must be made exactly
to measure.
Fix bracket to the back of filler
panel .
Pull the wine conditioning unit as far
as you need to out of the niche so
that you can tilt it towards you.
Loosely hand-screw the bracket with
the filler panel to the wine condition-
ing unit.
Align the filler panel to the wine con-
ditioning unit door using the long
slots to give a flush finish.
Now tighten the screws.
You can now push the wine condi-
tioning unit into the niche.
Push the wine conditioning unit into
the niche
Make sure that the mains cable
does not become trapped or dam-
aged as you push the wine condi-
tioning unit into its niche.
To avoid damaging flooring which is
susceptible to scratching, take great
care when pushing the appliance into
its niche.
Push the wine conditioning unit into
the niche until the front of the appli-
ance door is flush with adjacent fur-
niture doors.
Pull the wine conditioning unit for-
ward so that it stands proud of the
furniture doors evenly by 2 mm.
Installation
67