Table of Contents
Advertisement
Aligning the installation niche
The installation niche must be carefully
aligned using a level before installing
the wine conditioning unit. The niche
corners must be at 90° angles to each
other, otherwise the cabinet door will
not sit straight on all four corners.
– The side panels of the installation
niche must be even.
– The surrounding walls of the installa-
tion niche must be at least
5/8" (16 mm) thick.
– The surrounding walls must be se-
curely fixed to the floor or wall.
– The shortened side walls must be at
least 4" (100 mm) thick.
– The baseboard must be at least
1/2" (13 mm) thick (preferably
3/4" (19 mm)).
Installing the wine conditioning unit
Checking the installation niche
Check the installation dimensions.
Check the position of the electrical
connections (see "Electrical connec-
tion").
Check that all adjacent cabinets/units
are securely fixed to the wall. All adja-
cent cabinets/units must be securely
fixed to the wall.
Check the adjacent cabinets/units for
possible collisions when opening
doors (door opening angle).
23
Advertisement
Table of Contents
