Miele KWT 2601 Vi Operating And Installation Instructions page 45

If the outlet is no longer accessible after
installation, an additional means of dis-
connection must be provided for all
poles. Suitable means of disconnection
include switches with an all-pole con-
tact gap of at least 3 mm. These can be
circuit breakers, fuses, and relays.
The plug and power cord must not
come into contact with the back of the
Wine Storage Unit as vibrations can
cause damage to these components.
This could result in a short circuit.
Do not plug in other appliances behind
the wine conditioning unit.
Electrical connection
Do not connect the wine conditioning
unit to a stand-alone inverter such as
those used with an autonomous energy
source; for example, solar power.
When the wine conditioning unit is
switched on, power surges could result
in a safety switch-off. The electronic
unit could be damaged. The wine con-
ditioning unit must not be used with
what are known as energy-saving de-
vices either. These reduce the amount
of energy supplied to the unit, causing it
to overheat.
If the power cord needs to be replaced,
this must be done by a qualified techni-
cian.
45