Selecting additional settings
Performing a Self Test
Perform a
Self Test
that your wine conditioning unit is not
working properly and want to check if it
is suffering from any problems.
In settings mode , use the and
arrow buttons to select
select OK to confirm your selection.
Touch the sensor control if you
wish to terminate the process.
The
Self Test
starts and the wine condi-
tioning unit is checked for any faults or
malfunctions.
– The message
System Restarting
pears in the display if the Self Test
does not discover any faults or mal-
functions.
– If the Self Test does discover any
faults or malfunctions, they are indi-
cated as error messages in the dis-
play.
An alarm also sounds.
If you find the alarm disruptive, you
can switch it off in advance by touch-
ing the sensor control .
Make a note of the error message(s)
displayed.
Contact Technical Service and inform
them of the error message(s) on the
display.
Confirm the message with OK.
System Restarting
The appliance briefly switches off and
then back on automatically.
Self test completed
play.
58
if you are concerned
Self Test
ap-
appears in the display.
appears in the dis-
Confirm the message with OK.
The main screen appears on the display
again.
Switching on Door Assistant
You can choose between the two Door
Assistants
and
The default Door Assistant is
Push2Open
The
Push2Open
able for cabinet fronts without handles.
The door will then open automatically
when you gently press against it.
The
Pull2Open
for cabinet fronts with handles. The ap-
pliance door can be opened easily with
little force.
When the Door Assistant is switched
on, repeatedly closing the appliance
door early can lead to damage or
malfunctions.
Refrain from holding onto or closing
the appliance door while automatic
door opening is still extended. If you
have indeed closed the appliance
door, leave it closed for 5 minutes.
Automatic door opening resets itself.
Switching on Push2Open
In settings mode , use the and
arrow buttons to select
and select OK to confirm your selec-
tion.
Use the and arrow buttons to
select
your selection.
Use the and arrow buttons to
select
confirm your selection.
Push2Open
and
.
Door Assistant is suit-
Door Assistant is suitable
Mode
and touch OK to confirm
and touch OK to
Push2Open
Pull2Open
.
Door Assistant