Changing The Ip Address - Buffalo TeraStation WSS WSH5010N6 User Manual

Name
Remote Desktop
IP Address

Changing the IP Address

1
Click the NAS Navigator2 icon (
2
Click the TeraStation icon while holding down the control key, then select Configure > IP Address.
3
Clear the "Use DHCP" checkbox; enter the desired settings and the administrator password, then click Apply.
NovaBACKUP
NovaBACKUP is a Windows utility that lets you back up data on your computer.
The NovaBACKUP installer is available from http://d.buffalo.jp/WSH5010N6/. Select the region and model to go to
your specific model's d.buffalo website. Download the NovaBACKUP installer and install it onto your computer.
To download the installer, you will need the serial number of your TeraStation. The serial number is printed on the
label on the back of the unit.
Description
Click Open Remote Desktop to open Windows Storage Server.
Select the "Use DHCP" checkbox to assign an IP address from the DHCP server
automatically. If there is no DHCP server on the network, you cannot use this
function. Select the "Renew IP address" checkbox to obtain an IP address from the
DHCP server. You can manually enter a static IP address, subnet mask, and default
gateway.
) in the Dock to start NAS Navigator2.
95