Table of Contents
Advertisement
8
Insert the new drive into the empty slot, slide the drive in with the locking mechanism open, and swing the
lock back down until it clicks into the place.
1
9
Close the front cover with the key.
10
The "RAID-x RECOVERING 0%" message will be displayed on the LCD panel after 3 minutes.
RAID-x
RECOVERING 0%
11
When "RAID-x NORMAL" is displayed, drive replacement is finished.
RAID-x
NORMAL
Drive replacement is finished.
"TWO DRIVE DOWN" or "MULTIPLE DOWN" Is Displayed on the LCD
Panel
If either the "TWO DRIVE DOWN" message or the "MULTIPLE DOWN" message is displayed, there is no redundancy. It
is recommended to replace the defective drive immediately. Back up data before replacing drives.
Note: The "x" on the LCD panel message is a number of volume type.
2
81
Advertisement
Table of Contents
