• If the storage pool is created on drive 1, delete the storage pool before running the recovery process.
• Remove all USB devices except for the supplied SD card, a card reader, a mouse, and keyboard before recovering.
When it's completed, you can connect them back to the TeraStation.
Recovering Windows Storage Server
1
Turn off the TeraStation, following the procedure on the "Turning the TeraStation On and Off" section in
chapter 1.
2
Insert the SD card into the card reader (not included).
3
Connect a mouse, keyboard, and the card reader to the TeraStation using a USB 3.0 or 2.0 port.
4
Connect the monitor to the TeraStation using a HDMI or VGA port.
5
Press the power button to turn the TeraStation on.
6
Press the F11 key some times until the "Please select boot device:" is displayed. When it's displayed, stop
pressing F11. If it not displayed, repeat from the step 1.
7
Press the Down Arrow key and select the SD card beginning from "UEFI:", then press the Enter key.
8
The recovery process proceeds automatically.
9
When the recovery process finishes, the TeraStation shuts down automatically.
10
Turn on the TeraStation. If it boots up properly, recovery is completed.
98