Table of Contents
Advertisement
Operating system or partition requirements
This adapter is supported for the following versions of operating systems:
v AIX
– AIX 7.1, or later
– AIX 6.1, or later
– AIX 5.3, or later
v Linux
– Red Hat Enterprise Linux
– SUSE Linux Enterprise Server
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether there are any prerequisites for this feature and attaching devices.
To check for the prerequisites, see IBM Prerequisite website (www-912.ibm.com/e_dir/eServerPrereq.nsf).
Related tasks:
Installing PCI adapters
Related reference:
IBM Prerequisite Web page
Parts information
PCI adapter placement
"Backplane daughter cards and RAID enablement cards" on page 2
Find links to topics that cover Backplane daughter cards and RAID enablement cards.
4 Gigabit PCI Express Single Port Fibre Channel Adapter (FC 5773;
CCIN 5773)
Learn about the specifications and operating system requirements for the feature code (FC) 5773 adapter.
Overview
The 4 Gigabit PCI Express Single Port Fibre Channel adapter is a 64 bit, short form factor x4, PCIe
adapter with an LC-type external fiber connector that provides single initiator capability over an optical
fiber link or loop. The adapter automatically negotiates the highest data rate between the adapter and an
attaching device at 1 Gbps, 2 Gbps, or 4 Gbps of which the device or switch is capable of. Distances
between the adapter and an attaching device or switch can reach up to 500 meters running at 1 Gbps
data rate, up to 300 meters running at 2 Gbps data rate, and up to 150 meters running at 4 Gbps data
rate. When used with IBM Fibre Channel storage switches that support longwave optics, the adapter can
reach distances of up to 10 kilometers running at either 1 Gbps, 2 Gbps, or 4 Gbps data rates.
The adapter can be used to attach devices either directly, or with Fibre Channel switches. If you are
attaching a device or switch with an SC type fiber connector, you must use an LC-SC 50 micron fiber
converter cable (FC 2456) or an LC-SC 62.5 micron fiber converter cable (FC 2459).
The adapter has the following features:
v Compliant with the PCIe Base and Card Electromechanical (CEM) 1.0a specifications:
– x1 and x4 lane link interface at 2.5 Gbit/s (auto-negotiated with system)
– Supports VC0 (1 Virtual Channel) and TC0 (1 Traffic Class)
– Configuration and IO Memory read/write, completion, message
– Support for 64-bit addressing
– ECC error protection
65
Managing PCI adapters
Advertisement
Table of Contents
