IBM 8236-E8C Manual page 118

Table 22. Special detail sense data descriptions
Data Description
X Not used
A Number determined by the adapter driver based on the error. At present it will always be "0xFF"
for the special format.
B Return code from an operation
C Segment number of the data in this record
D Offset of the beginning of this record in the total data
E Length of valid data in this record
F Total length of data to be logged
For example, when logging a crash record the total length is usually 0x1000 bytes. Each of these records
can contain 0x300 bytes and there will be six of these error report entries. The first five segments will be
numbered 1, 2, 3, 4, 5 with length of 0x300 and offsets of x0, x300, x600, x900, xC00. The sixth entry will
be segment 6 with length of x100 and offset 0xf00.
Table 23. Error number values
Error number Error template
0x23 ICS_ERR6
0x25 ICS_ERR6
0x26 ICS_ERR6
0x27 ICS_ERR2
0x28 ICS_ERR2
0x29 ICS_ERR6
0x2A ICS_ERR6
0x2B ICS_ERR6
0x2C ICS_ERR6
0x2E ICS_ERR2
0x2F ICS_ERR6
0x30 ICS_ERR2
0x31 ICS_ERR6
0x32 ICS_ERR6
0x33 ICS_ERR6
0x34 ICS_ERR6
0x36 ICS_ERR6
0x4B ICS_ERR6
0x4C ICS_ERR6
0x4D ICS_ERR6
0x4E ICS_ERR6
0x50 ICS_ERR10
104
Power Systems: Managing PCI adapters for the 8233-E8B or 8236-E8C
Description of error
DHCP lease expired. Link is no longer usable.
Adapter Reset Timer expired
Mailbox time-out, mailbox provided
IOCB time-out
Time-out on invalid type timer
D_MAP_LIST failed return code provided. May need to increase the
max_xfer_size attribute for the adapter icsX
Time-out on invalid type timer
Received completion for adapter originated IOCB, but could not find the
original IOCB.
Size of mailbox IOCB is not equal to mb info size
Abort time out
Received unsolicited IOCB and protocol driver does not handle unsolicited
IOCBs
Adapter reported fatal error
Invalid command entry type, command provided.
Invalid command opcode, command provided.
Invalid command entry type, command provided.
Invalid command opcode, command provided.
Stub routine called.
D_MAP_INIT in config INIT failed, size of DMA resources provided in return
code field
D_MAP_INIT at open time failed, size of DMA resources provided in return
code field
Could not allocate delay timer at open time.
Could not allocate poll timer at open time
Debug Only Trace. Target is reporting busy. IOCB, and cmd included.