IBM 8236-E8C Manual page 68

Note: For CCIN 280D and CCIN 280E, see Table 8 for information about the supported feature codes
(FC) and part numbers.
Table 8. Supported FCs and part numbers for CCIN 280D and CCIN 280E
CCIN Description
280D Tape controllers
280E Disk controllers
Adapter specifications
Item Description
Adapter FRU number
046K6838 (Designed to comply with RoHS requirement.)
Wrap plug FRU number
012R9314
I/O bus architecture
PCI-X 2.0a, PCI 3.0, PCI-X Mode 2 - 266 MHz, PCI-X Mode 1 - 133 MHz, PCI - 66 MHz
Slot requirement
One available 3.3 volt PCI or PCI-X slot
FC compatibility
1, 2, 4 Gigabit
Cables
50/125 micron fiber (500 MHz x km bandwidth cable)
v 1.0625 Gbps 2 – 500 m
v 2.125 Gbps 2 – 300 m
v 4.25 Gbps 2 – 150 m
62.5/125 micron fiber (200 MHz x km bandwidth cable)
v 1.0625 Gbps 2 – 300 m
v 2.125 Gbps 2 – 150 m
v 4.25 Gbps 2 – 70 m
Maximum number
For the maximum adapters supported, see the PCI adapter placement topic collection for your
system.
Operating system or partition requirements
AIX 5L Version 5.2 with the 5200-08 Technology Level, or later
AIX 5L Version 5.3 with the 5300-04 Technology Level, or later
Red Hat Enterprise Linux version 4 U2, or later
SUSE Linux Enterprise Server 9 SP3, or later
Note: If you are installing a new feature, ensure that you have the software that is required to support
the new feature and that you determine whether there are any prerequisites. To check for the
prerequisites, see IBM Prerequisite website (www-912.ibm.com/e_dir/eServerPrereq.nsf).
For details about slot priorities and placement rules, see the PCI adapter placement topic collection for
your system.
Related tasks:
Installing PCI adapters
Related reference:
54
Power Systems: Managing PCI adapters for the 8233-E8B or 8236-E8C
Feature code FRU part number
1905, 5758, and 5761 046K6838
5760 No corresponding
feature part number
is supported in the
POWER7
Wrap plug part
number
012R9314
®
systems