Table of Contents
Advertisement
Feature 6833 is a 2-line per port WAN with modem adapter. This feature is the non-CIM (Complex
Impedance Matching) version offered in all countries and regions except Australia and New Zealand.
6833 is physically the same card as 2793, but 6833 indicates to IBM configurator tools that the IOA is
being used by the operating system in an IOPless mode.
6834 is a 2-line/port WAN w/modem adapter. This feature is the CIM (Complex Impedance Matching)
version which is offered only in Australia and New Zealand. 6834 is functionally equivalent to 2794, but
6834 indicates to IBM configurator tools that the IOA is being used by the operating system in an IOPless
mode.
Port 0 is the modem port and supports V.92 56K Async PPP, V.92 data modem, V.44 data compression,
V.34 FAX modem and FAX functions, such as ECM and 2D/1D conversion. Port 0 does not provide Sync
modem capabilities (SDLC and Sync PPP). Port 1 is the RVX port and supports multiple communications
protocols, including synchronous operations.
FRU numbers
6833 = 039J2282
6834 = 039J2286
*
Designed to comply with RoHS requirement.
Adapter type
Short, 32-bit, 66 MHz
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether there are any prerequisites for this feature and attaching devices.
To check for the prerequisites, see IBM Prerequisite website (www-912.ibm.com/e_dir/eServerPrereq.nsf).
For details about slot priorities and placement rules, see the PCI adapter placement topic collection for
your system.
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether there are any prerequisites for this feature and attaching devices.
To check for the prerequisites, see IBM Prerequisite website (www-912.ibm.com/e_dir/eServerPrereq.nsf).
The adapter is supported on the following versions of the operating systems:
v Linux
– Red Hat Enterprise Linux 5.6 for POWER, or later
– SUSE Linux Enterprise Server 11 Service Pack 1, or later
v IBM i
– IBM i 7.1, or later
– IBM i 6.1, or later
Related tasks:
Installing PCI adapters
Related reference:
IBM Prerequisite Web page
Parts information
PCI adapter placement
"Backplane daughter cards and RAID enablement cards" on page 2
Find links to topics that cover Backplane daughter cards and RAID enablement cards.
162
Power Systems: Managing PCI adapters for the 8233-E8B or 8236-E8C
*
*
Advertisement
Table of Contents
