Maintenance; Safety Instructions; Weekly Maintenance - Martin XHD QC 1 Installation Manual

Primary cleaner

Hide thumbs Also See for XHD QC 1:

Table of Contents

6.1

6.2

Maintenance

NOTE

Maintenance inspections should take place at least once a week.

Depending on operational conditions, shorter maintenance inter-

vals may be necessary.

NOTE

Read this section thoroughly before beginning any work.

WARNING! DANGER OF INJURY!

Body parts and/or clothing may get caught and pulled in by rotat-

ing parts or by the moving conveyor belt.

Before maintenance work is carried out, ensure that all power

sources to the conveyor belt system and its accessories are

switched off and secured against inadvertent switching-on.

Use warning signs!

1. Switch off the power supply of the conveyor belt and any other

equipment and secure these against being switched on inad-

vertently.

2. Remove all material deposits from the cleaner blade and the

mainframe.

3. Check that all securing parts are tightened. Tighten any loose

connections as required.

4. Check the tension of the cleaner and tighten it if necessary.

5. Check if the cleaner blades are worn out, damaged or parts are

missing.

M3504UK-10/15

Table of Contents