Machine Maintenance; Pump Mainteinance; Storing Machine - Tennant V-WD-24P Operator's Manual

MACHINE MAINTENANCE

To keep machine in good working condition,
simply perform the following maintenance
procedures.
WARNING: Unplug cord from outlet
when not in use and before servicing
machine.
All repairs must be performed by a
qualified service person.
- Wipe machine housing with a cloth and
mild detergent.
- Inspect vacuum hose regularly for holes,
loose cuffs or clogged debris.
- Inspect power cords for damage. Coil the
extension cord neatly after each use.
After wet vacuuming:
- Drain and rinse tank.
- Clean float valve and inspect it for damage.
Replace if damaged. Do not wet vacuum
without float valve installed.

PUMP MAINTEINANCE

Soil can deposit and lead to
malfunctions. Pump clear water or
thoroughly rinse the pump after
every use.
DO NOT RUN THE PUMP DRY. The
pump depends on water for cooling and
lubrication. Operating the pump without
water may cause the motor to overheat or
cause damage to parts of the pump. It may
also shorten the life of your pump.

STORING MACHINE

Before storing the machine perform the
following instructions:
1. Empty and rinse tank, accessory tools
and drain hose.
2. Store machine in a dry area in the upright
position on a level surface.
Do not store outdoors and avoid
getting wet. Do not allow machine
to freeze.
Soil can deposit and lead to
malfunctions. Pump clear water or
thoroughly rinse the pump after
every use.
TENNANT V-WD-24P
EN
11