Page 1
V- -BP- -10 Backpack Vacuum Cleaner Operator and Parts Manual Model Part No.: 1063946 - V--BP--10 (includes EZ Glidet Kit) 9008358 www.tennantco.com Rev. 00 (09-2010) *9008358* www.nobles.com Home Find... Go To..
... . . www.tennantco.com www.nobles.com Specifications and parts are subject to change without notice. Copyright E 2010 TENNANT Company. All rights reserved. V- -BP- -10 (09- -10) Home Find... Go To..
OPERATION IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING - To reduce the risk of fire, explosion, electric shock, or injury: 1. Do not vacuum with a frayed, worn, or damaged cord. 2.
OPERATION GROUNDING INSTRUCTIONS This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment--grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
OPERATION At the beginning of each shift, the filters should be checked. Empty or replace as necessary. PREPARING THE VACUUM FOR OPERATION NOTE: Never use a Micro filter without the cloth filter. 4. Push the hose into the cap opening . 5.
WARNING: To reduce the risk of fire, electric Use the proper attachments for the job. Tennant has shock or injury, empty the filter bag after every attachments to perform most jobs without requiring use and before storage.
OPERATION To install a Micro filter, slide the gasket of the Micro filter over the inlet on the inside of the top cap CARING FOR YOUR VACUUM (Figure 8), then replace the cap, making sure that the latches catch correctly. WARNING: To reduce the risk of fire, electric shock or injury unplug unit from wall outlet when not in use and before servicing.
OPERATION 4. Once a month (or more often if necessary) clean the dome filter, located inside the vacuum TROUBLESHOOTING underneath the Micro and cloth filters a. Pull the top piece of the dome filter off and remove the foam media (Figure 10). Shake it 1.
OPERATION SPECIFICATIONS MODEL V- -BP- -10 DIMENSIONS 10 in/254 mm W x 25 in/635 mm H x 8 in/203 mm D WEIGHT 11.5 lb / 5.2 kg VACUUM MOTOR 120V/60Hz, 1.8 hp / 1.34 kW, 1 stage WATER LIFT 100 in / 254cm AIRFLOW 150 cfm / 4.2 m FILTRATION...
OPTIONS TURBO FLOOR TOOL PART # DESCRIPTION QTY. 612607 BRUSH KIT, TURBO, W/ WAND, 1.25 11INCH JETSWEEPt FLOOR TOOL PART # DESCRIPTION QTY. 612648 TOOL, FLOOR, 1.5 X 20[JET SWP NYL BRUSH] V- -BP- -10 (09- -10) Home Find... Go To..
Page 14
REPAIR PARTS WARRANTY After the warranty period expires, repair parts supplied by Tennant Company are warranted against defects for the period of ninety (90) days. The repair parts warranty only covers parts, not labor or travel. SERVICE LABOR WARRANTY Labor and travel performed by a Tennant Company service representative are warranted for thirty (30) days from the date the repairs are completed.