Table of Contents
Related Manuals for Tennant V-WA-76
Summary of Contents for Tennant V-WA-76
- Page 1 V-WA-76 Wide Area Vacuum Cleaner Operator and Parts Manual IMPORTANT- Read these Instructions Carefully and Retain for Future Use. Model Part No.: 1070016 –V-WA-76 (220-240V/50-60 Hz) ® 9009405 www.tennantco.com 00 (01-2013)
-
Page 2: Table Of Contents
Handle Adjustment .............6 serial number handy. Parts and supplies may be ordered Bag Installation ..............6 online, by phone, by fax or by mail or from any Tennant or Nobles Authorized Service Center or Distributor. Brush Height Adjustment ............6 UNCRATING MACHINE: Carefully check carton for signs Operation of Machine ............6... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS This machine is intended for commercial use only. It is designed exclusively to pick up dry dirt, debris and dust in an indoor environment and is not constructed for any other use. When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. -
Page 4: Grounding Instructions
No adaptor should be used with this appliance. WARNING – the replacement or repair of damaged wiring should only be performed by a qualified electrician or by a Tennant Authorized Service Center or Distributor. SAFETY LABELS The safety labels appears on the machine in the locations indicated. -
Page 5: Parts Identification
PARTS IDENTIFICATION On/Off Switch 10 amp 1.6 amp Vacuum Motor Brush Motor Reset Button Reset Button Brush Start Triggers Vacuum Bag Compartment Lid Handle Adjustment Lock Lever Storage Compartment Power Brush Height Adjustment Pedal Cord 25.4 cm non-marking wheels 76 cm Brush REPLACEMENT BAGS AND FILTERS •... -
Page 6: Handle Adjustment
Full bag, obstructions, clogged filters, clogged brush, brush height set too low, etc. 3. Press the affected circuit breaker button to reset. 4. Resume operation If vacuum cleaner fails to turn on, contact a Tennant Authorized Service Center or Distributor. BRUSH HEIGHT ADJUSTMENT FOR BEST PERFORMANCE 1. -
Page 7: Exhaust Filter Replacement
9. Reinstall cap onto motors *Replace exhaust filter every 6 months. 10. Reinstall clamp. *Replace the vacuum motor filters every 6 months. MACHINE SPECIFICATIONS Model V-WA-76 Voltage / Frequency 220-240 V / 50-60 Hz Vacuum motor rating 1976W / 8 A Brush Motor rating... -
Page 8: V-Wa-76 Parts List
V-WA-76 PARTS LIST... -
Page 9: Recommended Spare Parts
NOT ILLUSTRATED BRACKET, BRUSH-MOTOR, FR/ (includes 4-1/4’-20 x 9009059 9009083 CABLE, BRUSH MOTOR, FR/ 1/2’ screws, 4-1/4” washers) 9010847 FILTER, EMC, 230VAC, 20A [AUS V-WA-76] 9010848 FILTER, EMC, 230VAC, 5A [AUS V-WA-76] RECOMMENDED SPARE PARTS Ref# Item# Description...