Pump Safety Instructions; Instructions That Must Be Strictly Followed - Tennant V-WD-24P Operator's Manual

EN
22. All repairs must be performed by a qualified service person. Use only manufacturer supplied
or equivalent replacement parts.
23. Do not expose machine to rain or moisture. Store indoors only.
24. Connect to a properly grounded outlet only. See Grounding Instructions.
25. To reduce the risk of disconnection of the appliance cord from the extension cord during
operating, secure the extension cord to the appliance plug as shown or described in the
Operating Instructions.
26. Warning - To reduce the risk of personal injury due to a loose electrical connection between
the appliance's plug and extension cord, firmly and fully attach the appliance plug to the
extension cord. Periodically check the connection while operating to ensure it is fully attached.
Do not use an extension cord that provides a loose connection. A loose connection may result
in overheating, fire, and increases the risk of a burning.
27. Maintain Appliance With Care - Inspect extension cord periodically and replace if damaged.
28. Do not use more than one extension cord with this machine.
WARNING
29. Water and electricity can be dangerous if certain precautions are not adhered to. This pump is
designed to operate perfectly safe in a water environment; however, improper use can result
in personal harm from electrical shock. Please pay attention to the following warnings.
30. Never touch any electrical device, including this pump, when it is touching water, in water,
or even in a moist environment. Always turn off all the switches and unplug (disconnect the
electricity) when working on or installing the unit.
31. RISK OF ELECTRICAL SHOCK. This pump is supplied with a grounding conductor and
grounding-type attachment plug. To reduce the risk of electrical shock, be certain that it is
connected only to a properly grounded, 3-hole outlet.
32. Do not use this pump to pump chemicals, flammable liquids, sewage or corrosive liquids. You
could injure yourself and the pump will fail. Pumping these types of liquids voids the warranty.
This pump will handle fluids the same way as water.
33. Your pump has thermal over-load protection built in. It is not recommended for pumping liquids
over 120°F/49°C. The thermal overload protector will automatically shut down the pump in
an overheat situation. It will then reset itself once the pump cools down. This overload is
designed as a safety device and it will fail after repeated use. Normal operation is for fluids
between 32°F and 120°F (between 0°C and 49°C).
34. DO NOT RUN THE PUMP DRY. The pump depends on water for cooling and lubrication.
Operating the pump without water may cause the motor to overheat or cause damage to parts
of the pump. It may also shorten the life of your pump.
35. Keep all electrical connections away from wet and moist environments. Wet connections can
cause electrical shock resulting in personal injury.
INSTRUCTIONS THAT MUST BE STRICTLY FOLLOWED - SAFE USE
- Read carefully the manual before use, in order to work safely.
Warning: Before operating, the appliance must be correctly assembled as described
in this manual. Check that all the equipped filtering elements are in place and
efficient.
- WARNING: Users must be properly trained to use the machine.
- CAUTION: Components used in packaging (ex: plastic bags) can be dangerous; keep away
from children, animals and people not aware of their actions.
4 TENNANT V-WD-24P
SAVE THESE INSTRUCTIONS

PUMP SAFETY INSTRUCTIONS