Yealink CP860 Configuring Manual page 62

YealinkCP860 Phones Configuring Guide
To configure paging list via CommPortal phone configurator:
Click on Paging Groups->Paging Group N.
1.
Enter the group name in the Description field.
2.
Enter the multicast IP address (e.g., 224.5.6.20) in the Address field.
3.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
Enter the multicast IP port number (e.g., 10008) in the Port field.
4.
Repeat the step 2-4, you can add more paging groups.
5.
Click Save changes to accept the change.
6.
Perform auto provisioning on the phone to download above configurations. For more
7.
information on how to perform auto provisioning, refer to
Files on page 11.
To configure a default Codec for multicast paging via CommPortal phone configurator:
Click on Paging Groups->Setting.
1.
Select the desired Codec from the pull-down list of Outgoing Page Codec.
2.
The default Codec is G722.
Click Save changes to accept the change.
3.
Perform auto provisioning on the phone to download above configurations. For more
4.
information on how to perform auto provisioning, refer to
on page 11.
If G722 codec is used for multicast paging, the LCD screen will display the
Note
that it is providing high definition voice.
54
Downloading Configuration
Downloading Configuration Files
icon to indicate