Maintenance; Ac Mains Supply - Roksan Audio K3 DAC Instruction Manual

ROKSAN K3 DAC
MANUAL
Included in the packing of your K3 DAC product you will fi nd the following:
• One mains lead fi tted with the correct mains power plug for your region
• One Roksan R7 remote control
After removing the product and the above items please retain ALL packing materials. Correct
packing is required for the transportation of your product.
After disconnecting the component from the mains power supply, the chassis and front panel
may be cleaned with a dampened cloth or chamois leather.
This product is designed to comply with the legal provisions of EU Directives 89/3336/EC and
72/23/EC. The standards that have been applied are those which were in force at the time of
the introduction of this product. This product bears the CE mark. This product is compliant to
EN 60065.
according to the manufacturer's instructions.
Your Roksan product is set to operate from a fi xed supply voltage which is marked on a label
next to the mains input plug. Before connecting the mains lead please check that your mains
supply corresponds to this label as below:
230V products:
115V products:
The mains lead supplied with this product has an IEC mains socket which plugs into the IEC
connector on the unit's rear panel. The other end is normally attached to the appropriate mains
plug for the country.
The plug should not normally be removed from the lead. If you do remove it, please dispose of
it safely so it cannot be plugged into a mains socket whilst in a potentially dangerous condition.
We suggest you obtain a new lead from your dealer.
UNPACKING

MAINTENANCE

EU DIRECTIVES
. Please ensure that other equipment connected to it is earthed

AC MAINS SUPPLY

Voltage range 220V-240V
Voltage range 100V-120V