2 hole basin set wall mounted no pop-up waste (4 pages)
Summary of Contents for Crosswater Taos 17-14-T
Page 1
Taos Pressure-balance Tub and Shower Set Trim 17-14-T Installation Instructions Tools You Will Need Teflon Tape Adjustable Wrench Hacksaw Screwdriver Adjustable Pliers For ease of installation you will need: Before beginning installation, check for any damage that may have occurred during transport. ●...
17-14-T Installation Instructions Carefully slide escutchen on valve. Install diverter sleeve, stem and If diverter knob is accessible, go to Remove the mud guard. button on to the valve. step #13. If not continue to step #4. 3/4 " 1/2 " 3/4 "...
Page 3
Cut stem and nipple extensions the amount noted in step # 9. (Never cut the stem and nipple while still on Remove the handle and escutcheon Re‐install the nipple and stem the valve. This may damage the assembly, the plate, stem and nipple. extensions.
Teflon Tape 9/16”min Teflon Tape Teflon Tape Apply teflon tape to the end of the Apply teflon tape to the shower arm Apply teflon tape to the tub spout shower arm and thread the and thread clockwise into the nipple nipple and thread on wall tub spout.
(5 ‐ 3/16 "with extensions) 7-5/8 " Warranty - All Crosswater London products come with a limited lifetime warranty. For full details, terms and conditions visit our website. For further information contact: Crosswater London, 393 Fortune Blvd., Milford, MA 01757 www.crosswaterlondon.com...
Need help?
Do you have a question about the Taos 17-14-T and is the answer not in the manual?
Questions and answers