Crosswater Leyden 14X-15P-T Installation Instructions

Crosswater Leyden 14X-15P-T Installation Instructions

Pressure-balance valve trim

Advertisement

Applicable Standards/Codes

IAPMO certified to meet or exceed the following:

Installation Dimensions

3-3/4"
7-1/4"
1-1/2"
2-1/8"
1/2"

Replacement Parts

1
2
15123197-A
14X-15P-T
1/2" NPT
5-1/2" - 5-7/8"
2-1/4" - 3-1/4"
NO.
escription
Part No.
5T1C0319NT
1
2
Cross Handle Assembly
14-XHDL
3
3
4
Leyden Pressure-balance Valve Trim
14X-15P-T
NT
Adjustable Wrench
For ease of installation:
To read the installation instructions completely before beginning.
To read all warnings, care, and maintenance information.
To complete the valve rough-in prior to installing this trim kit.

Tools You Will Need

Hacksaw
Adjustable Pliers
Before beginning installation, check for any damage
that may have occurred during transport.
Note: Damage claims cannot be made during or
after installation.
Screwdriver
Teflon Tape
15123197-A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Leyden 14X-15P-T and is the answer not in the manual?

Questions and answers

Summary of Contents for Crosswater Leyden 14X-15P-T

  • Page 1 14X-15P-T Applicable Standards/Codes IAPMO certified to meet or exceed the following: Leyden Pressure-balance Valve Trim 14X-15P-T Installation Instructions Installation Dimensions 1/2" NPT 3-3/4" 7-1/4" 1-1/2" 2-1/8" 5-1/2" - 5-7/8" 2-1/4" - 3-1/4" 1/2" Replacement Parts escription Part No. 5T1C0319NT Tools You Will Need Cross Handle Assembly 14-XHDL Adjustable Wrench...
  • Page 2 Remove the handle assembly, nipple cut the stem and nipple while still on Warranty: This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website. and handle assembly.Go to step and stem extensions.
  • Page 3 Leyden Cross Handle Installation Instructions 14X-14P-T, 14X-14-T, 14X-15-T, 14X-15P-T, 14X-17-T 1. Hold the handle escutcheon and turn it counterclockwise to remove 2. Take out the screw and lock 3. Remove the lever 4. Replace with cross handle washer with a Phillips screwdriver and re-install the screw and washer...

This manual is also suitable for:

Leyden 14x-15p-t-pcLeyden 14x-15p-t-pnLeyden 14x-15p-t-snLeyden 14x-14-tLeyden 14x-15-tLeyden 14x-17-t

Table of Contents