Feed Mode - Current Orbit Marine IC PRO LED Safety Instructions

LOOP IC Controller Programming
®
To Program a CUSTOM Color Spectrum
Press CUSTOM key M on wireless remote and "L4" will display on the LOOP
IC Controller screen. Use the RGBW keys to change the % intensity. Once the
desired color spectrum is achieved, Press and hold the CUSTOM key
for 5 seconds. The LOOP
On Demand Dynamic Modes
Moonlight Modes
Press either Full Moon
remote to activate on-demand moonlight. Program will run 30
minutes then resume into normal programming.
To exit on-demand program, press
Weather Modes
Press either Rolling Cloud
Storm , or Full Storm with Lightning
to activate on-demand weather. Program will run 30 minutes,
then resume into normal timer programming.
To exit On-Demand program, press
CLEAN Mode
Press CLEAN on wireless remote activate a color spectrum
()"*#
for cleaning the aquarium. Program will run for 30 minutes, then resume
into normal timer programming.
To exit on-demand programs at any time, press
eFlux Wave Pump Programming
Turning Pumps On/Off
Press the Main On/Off key
on or off. When turning off, "OFF" will be display on the LOOP
each pump icon will be followed by "---".
Turning Individual Wave Pumps On/Off
To individually turn each wave pump on or off, simply hold the designated pump
key for 5 seconds. The individual pump will turn on/off, if off the pump
+
,
-
icon will display "OFF" on the LOOP

FEED Mode

To set all wave pumps into feed mode, press the FEED Mode key
wave pumps (1,2,3) within the LOOP
"FEED" will appear on the LOOP
ramp back into their previous programmed flow setting.
NOTE: Any eFlux DC Flow Pumps within the LOOP
for 10 minutes. After 10 minutes, pumps will ramp back into their previous programmed flow setting.
**Note: Any on-demand Mode, CLEAN mode or FEED mode can be exited at any time by pressing
IC Controller will display "E4" indicating spectrum is saved.
®
or Fading Moon
on wireless remote.
ENTER
RESUME
,Random Cloud
on wireless remote
.
ENTER
RESUME
ENTER
RESUME
on wireless remote to turn all of the wave pumps
IC Controller.
®
network will stop flowing for 10 minutes and
®
IC Controller. After 10 minutes, wave pumps will
®
Page 9
on IC wireless
, Lightning
.
IC Controller and
®
FEED
network network will ramp down to a 30% flow speed
®
Installation Instructions
®
M
On-demand icon moonlight or
weather icon will display on screen
. All eFlux
ENTER
RESUME