Current Tetra GERLB2465 Installation Manual

Select TX Rigid Light Bar
GERLB2465
LED
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Save these instructions for future use.
FI
DA Monteringsvejledning
FR
DE Einbauanleitung
ES HU
Guía de instalación
RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
RISK OF FIRE
• Follow all IEC and local building codes
• Use only IEC approved wire for input/output connections.
• Minimum size 18 AWG (0.75 mm
• Do not operate the product with damaged parts.
• Product may fall down if not installed properly.
• For indoor use only.
• Environmental suitability (dry location)
• To ensure the product warranty is valid, please ensure all installation instructions and environmental conditions for storage
and operation are complied with.
IT
Asennusohje Guida all'installazione
LT
Guide d'installation Sumontavimo vadovas
NL
Felszerelési útmutató Installatiehandleiding
WARNING
).
2
NO
Monteringsanvisning
PL
Instrukcja instalacji
PT
Guia de Instalação
The LED luminaire must be connected to the
mains supply according to its ratings on the
product label.
• The light source of this luminaire is not replaceable;
when the light source reaches its end of life the whole
luminaire shall be replaced.
CAUTION
Installation Guide
EN
SIGN292EU | A-1013119
SV
Installationsanvisning