Current Orbit Marine IC PRO LED Safety Instructions page 7

LOOP IC Controller Programming
®
Turning Lights ON/OFF
Press the Main On/Off key
display will read "OFF." The LOOP
will shut off after 30 seconds.
Note: Turning the Orbit Marine IC PRO LED lights off will not turn the wave pumps off.
Pumps will continue to run at their programmed setting. Pumps must be turned on/off
separately than IC lights using the pump Main On/Off
off, display will read "OFF",
LOCK & UNLOCK Settings
The integrated LOCK/UNLOCK feature is designed to ensure other IR signals (e.g. TV
remote) do not change the settings on your LOOP
To lock all settings in the LOOP
for 5 seconds. "LOC1" will appear on screen along with lock icon.
To unlock and allow the wireless remote control to operate again, press LOCK
for 5 seconds. "LOCO" will appear on screen and lock icon will disappear.
Programming Settings
Setting Current Time of Day
Press SET CLOCK
SET
CLOCK
Press HOUR + and MINUTE-
HOUR
+
Hours and Minutes will change on the main digits of the display as keys are pressed.
Press ENTER/RESUME to save. The LOOP
lighting cycle.
Note: LOOP IC Controller uses military time from 00:00 to 24:00. For example,
®
9:00pm=21:00 hours. On/off times can only be set between the same 00:00 and
24:00 hours.
Setting Daily ON/OFF Times
Press ON TIME key
Press HOUR+ and MINUTE-
HOUR
+
ENTER/RESUME to save.
Press OFF TIME key
Press HOUR+ and MINUTE-
HOUR
-
At any time press ENTER/RESUME
to turn Orbit Marine IC PRO lights on or off. When off,
IC Controller will remain on and the backlit display
®
IC controller, simply press LOCK
®
the CLOCK icon will appear and main digits will blink.
to adjust the clock to the current time of day.
MINUTE
-
the ON icon will appear on the display and main digits will blink.
ON
TIME
to adjust the clock to the desire ON time. Press
MINUTE
-
the OFF icon will appear on the display and main digits will blink.
OFF
TIME
to adjust the clock to the desire OFF time.
MINUTE
-
to save.
ENTER
RESUME
key. When pumps are
IC Controller.
®
IC controller will now run the programmed
®
Page 7
Installation Instructions
LOCK
LOCK
Indicates light is off
Main Digits Blink