Table Of Contents - baracuda gotcha EP34 Series Owner's Manual

Introduction Introduction
Congratulations on the purchase of your new BARACUDA
designed and manufactured for easy installation, and years of carefree operation. Before installing the cleaner,
please take a few moments to become familiar with its components and to review the items listed under Important
Information
.
Section 1. Important Safety Instructions
Section 2. Getting Started
2.1 General Specifications
2.2 Unpacking
2.3 Cleaner Control Unit
2.4 Connecting the Floating Cable
to the Control Box
Section 3. Operation
3.1 Submerging the Cleaner
3.2 Running the Cleaner
3.3 Stopping the Cleaner
and Removing from the Pool
3.4 Rinsing the Cleaner
3.5 Cleaning the Filter Canister
3.6 Storing the Cleaner
The BARACUDA Gotcha™ is suitable for most domestic in-ground pools up to 10m x 5m.
®
Pool surfaces include: Concrete, pebblecrete, quartzon, fibreglass and vinyl. Not suitable for tile pools.
Not suitable for above ground pools. Suitable for medium to large debris.
YOUR CLEANER HAS BEEN DESIGNED AND MANUFACTURED TO BE EASILY INSTALLED AND TO
PROVIDE LOW MAINTENANCE OPERATION. A WARRANTY CARD IS SUPPLIED IN THE BOX. PLEASE GO
TO BARACUDA.COM.AUTO REGISTER FOR WARRANTY.
Taking these steps will help ensure prompt warranty service, should it be required. If service is required, please
contact your original dealer. If the original dealer does not perform warranty service, please visit
www.baracuda.com.au to locate an independent service company near you. If you are unable to locate a service
company,please call our Baracuda Customer Service at 1300 784 423.
2
Gotcha
®

Table of Contents

3 Section 4. Maintenance
4.1
4
4.2
4 4.3
4
Section 5. Troubleshooting
4
5.1
5
5.2
6
6
6
7
7
7
8
Suitable Pools
robotic pool cleaner. Your Gotcha is
™
Cord Tangling
Replacing the Brushes
Replacing the Track
Using the Information LED
General Troubleshooting
9
9
9
10
10
10
11
H0670800