baracuda tracker Owner's Manual
  1. Manuals
  2. Brands
  3. baracuda Manuals
  4. Swimming Pool Vacuum
  5. tracker
  6. Owner's manual

baracuda tracker Owner's Manual

Hide thumbs Also See for tracker:

Advertisement

Table of Contents

Owner's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the tracker and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for baracuda tracker

Summary of Contents for baracuda tracker

  • Page 1 Owner’s Manual...
  • Page 2 Exceptional After Sales Support We have a trained team on hand to help walk you through how to set up your cleaner and equipment. For installation and troubleshooting questions, please directly contact BARACUDA After Sales. ® And don’t forget to register your product online for warranty (see Warranty Card inside the pack).
  • Page 3 Always insist on genuine Baracuda replacement parts. Non-Baracuda parts are not made to our specifications. They may have an adverse effect on the operation of your Tracker, or may even damage it. Complete Cleaner Parts in the Pack 1.

  • Page 4: Installation

    Installation 1. Before You Start For best cleaner performance, you will need to follow the following steps of the installation. 1.1 Following manufacturer’s instructions, clean the filter and empty the skimmer and the pump strainer basket. 1.2 If your main drain is connected to the skimmer box, block off access. 1.3 Manually vacuum the pool.
  • Page 5 Installation 4th case: with any other type of Skimmer Box and Vac plate Simply insert the AD Flow valve directly into the universal AD Flow valve weir cuff which will then fit into the top of the Vac plate. Universal Weir Cuff NOTE: The AD Flow valve has three settings: High (3), Medium (2) and Low (1).

  • Page 6: Check Cleaner Flow

    Installation 4. Connecting Cleaner Head to Flow Regulator Valve 4.1 Remove orange sticker off leader hose. 4.2 Attach the flow regulator valve to the leader hose and connect the cleaner head to the flow regulator valve. 5. Re-Connecting to Skimmer Box 5.1 Temporarily disconnect hose from skimmer, turn on pool filter pump.

  • Page 7: Care And Maintenance

    The climbing ability of the cleaner is dependent on the pool’s shape and available water flow. If your Tracker is not climbing the pool walls, ensure the flow is correct by counting wheel speed. Also, ensure the pools surface is not covered in algae as this slippery surface will affect the cleaner’s traction.
  • Page 8 Care and Maintenance Removing Debris from the Engine WARNING To avoid serious injury, make sure that the cleaner is disconnected from the hose and the pool suction pump is turned off prior to starting this operation. 1. Push the latch release button on the top of the cleaner. 2.

  • Page 9: Troubleshooting

    Troubleshooting If you experience a problem with your Tracker , please follow the troubleshooting steps below to ™ restore performance. If further assistance is required, contact BARACUDA After Sales Support Department at ® 1300 784 423. Please have your serial number and date of purchase available when you call.
  • Page 10 Baracuda is a registered trademark of Zodiac Group Australia Pty Ltd ABN 87 002 641 965 219 Woodpark Rd, Smithfield, NSW 2164 Australia Tel: 1800 688 552 www.zodiac.com.au © Copyright Zodiac Australia Ltd 2015 H0532000 Rev A...

Table of Contents