Receipt Of Equipment; Inspection; Unpacking And Handling; Tools - Ingersoll-Rand XF 20 Operator's Instruction Manual

1.0 RECEIPT OF EQUIPMENT

1.1 INSPECTION

When you receive the compressor please inspect it
closely. Any indication of careless handling by the carrier
should be noted on the delivery receipt especially if the
compressor will not be immediately uncrated. Obtaining
the delivery man's signed agreement to any noted dam-
ages will facilitate any future insurance claims.
IMPORTANT
READ THIS
LOST OR DAMAGED GOODS
THOROUGHLY INSPECT THIS SHIPMENT
IMMEDIATELY UPON ARRIVAL
OUR RESPONSIBILITY FOR THIS SHIPMENT
CEASED WHEN THE CARRIER SIGNED
BILL OF LADING
If goods are received short or in damaged condition, it is important that
you notify the carrier and insist on a notation of the loss or damage
across the face of the freight bill. Otherwise no claim can be enforced
against the transportation company.
If concealed loss or damage is discovered, notify your carrier at once
and request an inspection. This is absolutely necessary. Unless you do
this the carrier will not entertain any claim for loss or damage. The agent
will make an inspection and grant a concealed damage notation. If you
give the transportation company a clear receipt for goods that have been
damaged or lost in transit, you do so at your own risk and expense.
WE, AT I-R, ARE WILLING TO ASSIST YOU IN EVERY POSSIBLE
MANNER TO COLLECT CLAIMS FOR LOSS OR DAMAGE, BUT THE
WILLINGNESS ON OUR PART DOES NOT MAKE US RESPONSIBLE
FOR COLLECTION OF CLAIMS OR REPLACEMENT OF MATERIAL.
THE ACTUAL FILING AND PROCESSING OF THE CLAIM IS YOUR
RESPONSIBILITY.
Ingersoll-Rand Company
Davidson, North Carolina
APDDGFO-99-79

1.2 UNPACKING AND HANDLING

The compressor package has been mounted on a base
which provides for forklifting between the two side chan-
nels to facilitate handling during shipment. Care in posi-
tioning the forklifts is important because the location of
the center of gravity is strongly affected by the location of
the compression module and drive motor.
Slings can be used to lift the crates, but spreader bars
must be used to prevent the slings from exerting a force
against the sides of the crates.

1.3 TOOLS

Remove compressor unit from wooden skid. A crowbar
and hammer will be needed.
8
FORKLIFT PADDING
WILL REDUCE SCRATCHES
AND MARS
SPREADER
BARS