Options; Remote Start/Stop; Remote Start/Stop And Power Outage Restart Option; Sequencer Control - Ingersoll-Rand XF 20 Operator's Instruction Manual

7.0 OPTIONS

7.1 REMOTE START/STOP

The remote start/stop option allows the operator to
control the compressor from a remote mounted
start/stop station. This option may be factory
installed or a field installation kit is available. This
option is a plug-in module for machines supplied
with the Intellisys option.
With the remote start/stop option installed, two differ-
ent switches can be wired to the Intellisys
remote start/stop. Refer to electrical schematics in
section 8.0 for wiring locations. The switches are
customer supplied and must be of the momentary
type. The stop switch contacts are normally closed
and start switch contacts are normally open.
7.2 REMOTE START/STOP AND POWER OUTAGE
RESTART OPTION
When the Power Outage Restart Option is desired, a
field installation kit that contains this feature is avail-
able. The option includes a logic controller for
machines supplied with standard controls, or a plug-
in module for machines supplied with Intellisys con-
trol. All of the hardware necessary for installation is
included.
The Power Outage Restart Option is for plants that
have interruptions in their incoming power supply to
the compressor and must maintain an uninterrupted
supply of compressed air. When turned on, the
option allows the compressor to
automatically restart and load 10 seconds after
incoming power is restored after a power interrup-
tion.

7.3 SEQUENCER CONTROL

Sequencer control capability can be added to the
®
Intellisys System by utilizing a sequencer interface.
This option is available as a field installation kit.
44
This machine is remote
start and stop equipped.
May start or stop at
anytime.
Can cause severe injury or
death.
®
for
WARNING
!
Disconnect power before
servicing.
Lock and tag out.
See Operators / Instruction
Manual.