Sign In To Mini Ii - Vectron POS Mini II User Manual

P O S MInI II
7. 3 . Si g n i n to M i n i I I
This chapter informs you about the sign in procedure and
tells you how to sign in to Mini II.
Depending on the programming of your Mini II you have to
sign in to the POS system. Only then you can enter PLUs
for example.
The Vectron POS software stores the entries and assigns
them to the respective operator. You can assign access
rights for every operator, which determine the functions
for which he is authorized.
There are different ways for sign in to Mini II. If you have
an operator key that you want to use for sign in please con-
tinue reading in chapter 7.3.2 "Sign in via operator key"
on page 58 . If you do not have an operator key, please
continue in chapter 7.3.1 "Sign in via operator button" on
page 57 .
The POS system may be programmed in that way that you
can use both methods for sign in.
56
i
Buttons that are mentioned in this chap-
ter and that can be displayed as graphi-
cal elements, are shown in chapter 13
"Icons" on page 86 .