Vectron Pos Software; Use As Directed - Vectron POS Mini II User Manual

P O S MInI II
4 . 2 . Ve c tro n P OS s of t wa re
Mini II is supplied with Vectron POS software, which your
Vectron dealer configured and programmed.
All Vectron POS systems use the same software. The user
interface can be adjusted individually to the different mo-
bile and stationary POS systems.
The functions that can be used with the installed Vectron
POS software depend on the applied software version, con-
figuration and programming of the Mini II.
4 . 3 . Us e a s d i re c te d
Mini II may be used as POS system. The power supply Vec-
tron PS60/PS61 may be used for supplying the Mini II with
power.
Use the supplied power cord with safety plug to connect
Mini II and power supply Vectron PS60/PS61 to a grounded
socket. Using other power supplies and power cords is not
as directed. The power supply network must be protected
with a fault current circuit breaker.
Mini II and power supply Vectron PS60/PS61 must not be
opened. During normal operation of Vario II the port cov-
ers must not be removed from the ports. POS system and
accessories must not be changed.
The operating company of Mini II is responsible for storage
and backup of data created with the Mini II. The data is to
be processed and stored in such a way that they comply
with e.g. the demands of fiscal authorities.
Depending on configuration and programming of the Vec-
tron POS software, operators can modify the stored data,
22