Explanatory Notes On Content - Vectron POS Mini II User Manual

For this reason, this user manual contains only the infor-
mation that applies for all Mini II POS systems, since the
Vectron POS software should be programmed and con-
figured individually for you. This user manual does not
contain information about programming and configuration
of the Mini II POS system.
You should have obtained detailed training and documen-
tation, adjusted to your programming and configuration of
Vectron POS software, from your Vectron dealer.
3 . 4 . E x p l a n a to r y n otes o n co nte nt
The chapter "Specification" gives an overview on the
tasks for which you can use the Mini II. In chapter "Device
description" you are informed about the components of
Mini II, where you find the components, their designation
and the functions they have.
The chapter "Starting" explains the preparations required
EN
for starting the Mini II. The normal mode of the Mini II is
explained in chapter "Operation". The chapter "Shut down"
describes how to shut down the Mini II if you do not use it
for a longer period.
The chapter "Errors, possible reasons and troubleshoot-
ing" helps you to remove errors. The chapter "Service and
maintenance" explains how to clean the Mini II and how to
get technical support.
The chapter "Disposal" describes how to dispose of Mini II
after use. The "Glossary" explains abbreviations and
terms that are used in connection with Mini II. The chapter
"Icons" explains the graphical elements of Mini II and their
meaning.
17