Vectron POS Mini II User Manual page 15

Damage of POS system components caused by excessively
high voltages or currents.
Use an earthed socket to which alternating current
X
between 110 and 240 volts is connected.
Use power sources which are protected with a residual-
X
current circuit breaker.
Malfunctions caused by faulty programming.
Only change the programming when your are absolutely
X
sure of the effects this will have.
Protect the programming and programming functions
X
with passwords.
Your Vectron dealer will support you should you have
X
questions on programming or will program the POS
system according to your requirements.
Damage of touch screen through unsuitable objects.
Please touch the screen exclusively with fingers or the
X
provided stylus.
Burn-in effect through static image content.
Shadow images can remain visible on the display due to
static image content.
Please configure the screen saver.
X
Your Vectron dealer will support you should you have
X
questions on programming or will program the POS
system according to your requirements.
Aggressive cleansers can damage the housing surface.
Do not use any scouring or dissolving agents for cleaning.
X
If necessary clean the housing surface with a smooth,
X
lint-free cloth. In case of strong contamination you can
dampen the cloth with water or with a mild, residue-free
cleanser.
Damage to POS system components when transporting in
unsuitable packing.
Dispatch the POS system components exclusively in the
X
original packing.
NOTICE
EN
15