Viessmann EVO-COOL Series Installation And Operating Instructions Manual page 9

Push the enclosed defrost water tray with the side clips (P) in
the lower guide up to the end of the evaporator line to the
back. Then push the tray upwards and ca. 10 mm to the back,
again.
The defrost water tray is correctly positioned if the side clips (P)
on the defrost water tray are positioned on the metal clips (Q).
Fill out the area above the Refrigeration unit hanging rail with
the enclosed Armaflex hoses (N) as sealing material.
* Seal the rail with sealant if necessary.
Remount the front access cover, securing it to the unit with the
enclosed sheet-metal screws.
Attention!
If cable ducts or the like are to be installed next to the
Refrigeration unit, a space of 30mm must be maintained
between the cable duct and the unit to ensure that the unit
sidewall can be removed for maintenance work.
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or regar-
ding a certain purpose always require a special written agreement.
Page 45 GB
P
*
*
Right reserved to make technical changes!
GB