Viessmann EVO-COOL Series Installation And Operating Instructions Manual page 21

Submenu 1 Submenu 2
Time
Date
Data logger
licence
Service number
Service number
Back
Pumpdown Deactivate
NotStopp
PmpDwn
Pumpdown time
Pumpdown delay
Low pressure sw.
Back
Factory
settings
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or regar-
ding a certain purpose always require a special written agreement.
Page 57 GB
Presetting
Values
CS Cooler FS Freezer
Time
Date
Opera-
ting field
number in
upper line,
licence
number in
lower line
Service
number
of the ref-
rigeration
specialist
Service
number
of the ref-
rigeration
specialist
Yes / No Yes Yes
10 sec to
10 10
180 Sec
10 sec to
10 10
60 sec
5 min to
15 15
60 min
Yes / No No No
Yes / No
Description
Time setting.
Date setting.
The system number is displayed in the upper line. If
the data logger is activated, the licence number also
appears in the second line. If the data logger is ret-
rospectively activated, the system number has to be
sent to the factory to generate the licence number.
This is then entered in the lower line.
The service telephone number of the refrigeration
specialist can be entered here. This is shown on the
display alongside the error in the event of a fault.
The service telephone number of the refrigeration
specialist can be entered here. This is shown on the
display alongside the error in the event of a fault.
Activation of the pump down or pump out function.
Restart is required on selection.
Maximum pump down running time.
Running time of the pumpout if no low pressure
switch is built in.
Standing time for pumpout before the compressor
exhausts the cooling medium again..
Specifi cation whether a low pressure switch is fi tted.
Resets the adjusted parameters to the preset factory
parameters.
Right reserved to make technical changes!
GB