Viessmann EVO-COOL Series Installation And Operating Instructions Manual page 7

Hang the unit on the storage cell wall while pushing
against it from the outside.
Slide the holding angle against the inside cell wall and
tighten it securely with one or two bolts.
Loosen the locking screws (2 ea.) on the front access
cover.
Pull the front panel at the bottom a little bit forward
then push it upwards and take it off by pulling it forward
again.
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or regar-
ding a certain purpose always require a special written agreement.
Page 43 GB
Units without a
display have two
additional screws on
the front cover
Right reserved to make technical changes!
GB