Configuration Via Rs-485 - ICP DAS USA CL-201-WF User Manual

4. Configuration via RS-485

 The factory default settings for RS-485 communication
 Address: 192
 Protocol: Modbus/RTU

Baudrate: 9600

Parity: N,8,1

Response Delay (ms): 0
Note
If there are multiple CL-200 loggers connected to the same RS-485 network, each
logger needs be set with a unique RS-485 address. More than one module having
the same address will cause communication failure
 Testing RS-485 Communication
1. Download the DCON Utility Pro from
http://ftp.icpdas.com/pub/cd/iiot/utility/
2. Launch the DCON_Utility_Pro.exe.
3. Click the icon
CL-200 Series User Manual
Stop Search
Start Search
Set COM port
Configuration
to configure the COM port.
Version 1.2.0 Apr. 2019 - 55 -