Centring The Mainframe Beneath The Conveyor Belt - Martin Brush Cleaner Installation Instructions Manual

5.2.5
© Martin Engineering GmbH
CAUTION! RISK OF DAMAGE!
Off-track running can cause damage to the conveyor belt edge
and/or the
cleaning elements.
Alignment of the secondary cleaner in accordance with the
following instructions.
NOTE
The following displays are examples and can differ from the
secondary cleaner actually used.

Centring the mainframe beneath the conveyor belt

1
A
Fig. 7:
Pos.
1 Chute wall
2 Driving drum
3 Cleaning elements
Tab. 2: Centring the secondary cleaner beneath the conveyor belt
1. Measure the clearances (A) and (B) between the edge of the
cleaning elements and the conveyor belt edge.
NOTE
The conveyor belt must protrude around 50 to 100 mm from the
left and right sides. The cleaning elements must be centrally
aligned beneath the conveyor belt.
Description
20
2
A
3
M3289UK-01/17