Table of Contents
Advertisement
© Martin Engineering GmbH
If these are not the same, the brush elements will shift on the main
axle.
1 2
Fig. 8:
2. Loosen locking collar (1, Fig. 9) and adjusting ring (5, Fig. 9) on
both sides.
3. Shift the cleaning elements so that clearance A is equal to
clearance B.
4. Tighten adjusting ring (5, Fig. 9) and securing ring (1, Fig. 9) on
both sides.
21
2
1
M3289UK-01/17
Advertisement
Table of Contents
