Appliance Data - Wonderfire 530U PRESIDENT Installer's Manual

This product uses fuel effect pieces, burner compartment walls and gaskets containing
Refractory Ceramic Fibres (RCF), which are man-made vitreous silicate fibres. Excessive
exposure to these materials may cause temporary irritation to eyes, skin and respiratory
tract. Consequently, it makes sense to take care when handling these articles to ensure that
the release of dust is kept to a minimum. To ensure that the release of fibres from these
RCF articles is kept to a minimum, during installation and servicing we recommend that
you use a HEPA filtered vacuum to remove any dust and soot accumulated in and around
the fire before and after working on the fire. When replacing these articles we recommend
that the replaced items are not broken up, but are sealed within a heavy duty polythene
bag, clearly labelled as RCF waste. This is not classified as "hazardous waste" and may be
disposed of at a tipping site licensed for the disposal of industrial waste. Protective clothing
is not required when handling these articles, but we recommend you follow the normal
hygiene rules of not smoking, eating or drinking in the work area and always wash your
hands before eating or drinking.
This appliance does not contain any component manufactured from asbestos or asbestos
related products.
Supply pressure
Input – Max. (Gross)
Input – Min. (Gross)
Test pressure (Cold)
Burner injector
Appliance category
Efficiency class
*When converted using kit no. 9500390
Figure 1 Dimensions
2 . A P P L I A N C E D A T A
Nat Gas G20
20mbar
6.12kW
1.90kW
9.2+0.75mbar
(3.7+0.3in w.g.)
Bray cat. 82 size 580
II
2H3P
Propane G31*
37mbar
5.70kW
3.51kW
26.2+0.75mbar
(10.5+0.3in w.g.)
Bray cat. 92 size 200
2
Side projection
"A"
Up to 8"
More than 8"
Non-combustible alcove
Min clearance from
appliance side "B"
1"
6"
5