Ceramic Logs Installation - Wonderfire 530U PRESIDENT Installer's Manual

Figure 26
Figure 27
Figure 28
9.2.

Ceramic Logs Installation

(See Section 9.3 for ceramic coals)
1. Place the base log on the supports in the firebox and against the firebox back. See
figure 26.
2. Place the rear log over the base log. Locate the holes in the top log into the pegs in the
base log. See figure 27.
3. Place the front log behind the metal lip at front of the firebox. See figure 28.
4 Place the right side log in the hollow at right of the base log. Rest the narrow nose of
this log on the projection at front centre of the base log – It is important that the narrow
nose does not drop down to touch the burner. See figure 29.
5. Place the left side log on base log at the left side. Locate its nose tip behind the nose of
the right side log. It is important that the narrow nose does not drop down to touch the
burner. See figure 30.
Figure 29
14
Figure 30