Window Refitting & Checking - Wonderfire 530U PRESIDENT Installer's Manual

1 0 . W I N D O W R E F I T T I N G & C H E C K I N G
Figure 36
16
1. Place the window centrally against the engine unit and resting on the support at
bottom front of the engine.
2. Pull the clamping bars forward and rotate inwards to secure the top of the window.
See figure 36
3. Fit the two spring loaded bolts through the bottom of the window and tighten to
secure the bottom of the window. See figure 36.
4. Pull the top of the window forward and release to check that the window opens
Figure 37
slightly and returns in the event of a delayed ignition explosion.
See figure 37.
Figure 38
5. Similarly check the bottom of
the window by pulling it forward
and releasing. See figure 38.
6. Apply light hand pressure
against the window frame sides to
bed in the window seal.