6 .
F L U E I N S T A L L A T I O N & A P P L I A N C E F I X I N G
10
6.1.
Preparing for Floor Fixing
If it is intended to fix the stove to the floor, position the appliance in its final location
checking that the flue unit can be correctly installed. Mark through the two fixing holes in
the appliance base. Move the appliance away. Plug the holes if necessary.
6.2.
Flue system installation
Reposition the appliance in its final location Connect the 100mm Selkirk draughthood
connector Code No. 29304 to the adapter collar. Install the flue system in accordance with
the Selkirk instructions supplied with the system.
If installing the flue system into an existing masonry chimney, the chimney must be
cleaned and checked to make sure that it is safe for use.
Floor fixing
If required, screw the appliance to the floor through the two holes in the base.