1. Manuals
  2. Brands
  3. TPC Manuals
  4. Dental equipment
  5. LED 55N
  6. User manual

TPC LED 55N User Manual

Cordless led curing light
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TPC
User Manual
LED 55N
Cordless LED Curing Light
• All instructions in this USER'S MANUAL must be completely read before installation or operation.
REV. 1-1-13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LED 55N and is the answer not in the manual?

Questions and answers

Related Manuals for TPC LED 55N

Summary of Contents for TPC LED 55N

  • Page 1 User Manual LED 55N Cordless LED Curing Light • All instructions in this USER’S MANUAL must be completely read before installation or operation. REV. 1-1-13...

  • Page 2: Table Of Contents

    Table Of Contents 1. INTRODUCTION 1.1 TECHNICAL INFORMATION 2. FEATURES 3. ACCESSORIES 4. INSTALLATION 5. OPERATION 6. MAINTENANCE 7. TROUBLESHOOTING 8. WARRANTY...

  • Page 3: Introduction

    1. INTRODUCTION Thank you for purchasing the LED 55N LED curing light. The LED 55N is a dental curing light which uses the latest LED technology to polymerize composite resin. Caution Attention: Important information is being presented. Refer to the Operator’s Manual for more informa tion.

  • Page 4: Features

    4. Timer The Led 55N has a fixed timer. The unit will cure for a total of 20 seconds. At 10 seconds the light will beep indicating that you have reached the 10 second time mark. At 20 seconds the light will beep again and automatically stop the curing process.

  • Page 5: Accessories

    The battery indicator on the charging base will show the sign of full power when battery is fully charged. LED 55N will detect the charging automatically. There will be one short beep tone generated when it has been properly put on to the Charging Base.
  • Page 6 4. Installation Connect power adaptor to the charging base. Remove protective battery Place batteries in the covers. charging base. Attach battery to light Attach light shield. Insert light guide. handpiece. 4.1 Charging Base Charging base indicators 1. light intensity sensor. Place the light guide on this sensor to verify there is sufficient light to cure.

  • Page 7: Operation

    5. Operation A. Set Curing Program Press and hold the function switch for two seconds and you will see the modes change every second. To stop on the desired mode simply let go of the depressed button for the desired mode. FAST PULSE Function...

  • Page 8: Maintenance

    6. MAINTENANCE 1. Be sure there is no resin or material sticking to the surface of the light guide. 2. If materials are sticking on the light guide immediately clean it with soft cloth. Keep light guide clean for better light intensity and curing performance.

  • Page 9: Warranty

    All of our products sold are guaranteed to be free from defects in workmanship and materials for a 1 year from date of purchase, unless otherwise stated. TPC will repair or replace any defective part at no charge. During the warranty period.

Table of Contents