Garmin GTN 635 Installation Manual page 188

GTN 650
PARALLEL DME 1MHZ-A
PARALLEL DME 1MHZ-B
PARALLEL DME 1MHZ-C
PARALLEL DME 1MHZ-D
PARALLEL DME 1MHZ-E
PARALLEL DME 100KHZ-A
PARALLEL DME 100KHZ-B
PARALLEL DME 100KHZ-C
PARALLEL DME 100KHZ-D
PARALLEL DME 100KHZ-E
PARALLEL DME 50KHZ
DME COMMON
NOTES:
1. ALL WIRES 24 AWG OR LARGER UNLESS OTHERWISE SPECIFIED.
2. GROUND DESIGNATIONS:
3. AT THE GTN 650, CONNECT SHIELD GROUNDS TO THE CONNECTOR BACKSHELL -- THE SHIELD LEADS MUST BE LESS
THAN 3.0". CONNECT OTHER SHIELD GROUNDS TO AIRCRAFT CHASSIS WITH AS SHORT A CONDUCTOR AS PRACTICAL.
4. REFER TO MANUFACTURER‟S DOCUMENTATION FOR COMPLETE PINOUT AND INTERCONNECT.
Page D-34
Rev. C
P1004
45
46
47
33
56
37
39
40
42
54
43
41
SHIELD BLOCK GROUND
s
Figure D-22. Parallel 2 of 5 DME Tuning
DME
1 MHZ-A
1 MHZ-B
1 MHZ-C
1 MHZ-D
1 MHZ-E
100 KHZ-A
100 KHZ-B
100 KHZ-C
100 KHZ-D
100 KHZ-E
50 KHZ
DME COMMON
10 MHZ-A
10 MHZ-E
2 X 5 CODE SELECT
N/C SLIP CODE SELECT
N/C
BCD CODE SELECT
AIRFRAME GROUND
GTN 625/635/650 TSO Installation Manual
190-01004-02