Table 4-5. Socket Contact Part Numbers - Garmin GTN 635 Installation Manual

Wire Gauge
Garmin P/N
Military P/N
AMP
Positronic
ITT Cannon
Notes:
[1] For configuration module pins, ensure that the crimp tool is set to crimp 28 AWG wire (indenter
setting of ‗4').
[2] Contacts listed are not to be used for configuration module wiring. Use the contacts supplied with
the configuration module when installing configuration module wires in P1001.
[3] Non-Garmin part numbers shown are not maintained by Garmin and are subject to change without
notice.
GTN 625/635/650 TSO Installation Manual
190-01004-02

Table 4-5. Socket Contact Part Numbers

Configuration Module
78-pin Connector (P1001)
28 AWG [1]
336-00021-00
N/A
N/A
N/A
N/A
P1001-P1004
22-28 AWG [2]
336-00021-00
M39029/58-360
204370-2
MC8522D
030-2042-000
Page 4-7
Rev. C