Installation And Configuration; Installing The Ni Pxie-8101/8102 - National Instruments PXI Express Series User Manual

Installation and Configuration

This chapter contains information about installing and configuring your
NI PXIe-8101/8102 controller.

Installing the NI PXIe-8101/8102

This section contains general installation instructions for the
NI PXIe-8101/8102. Consult your PXI Express chassis user manual for
specific instructions and warnings.
1.
Caution To protect both yourself and the chassis from electrical hazards, leave the chassis
powered off until you finish installing the NI PXIe-8101/8102 module.
2.
3.
© National Instruments Corporation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Plug in your chassis before installing the NI PXIe-8101/8102. The
power cord grounds the chassis and protects it from electrical damage
while you install the module. Make sure the power switch is turned off.
Remove any filler panels blocking access to the system controller slot
(slot 1) in the chassis.
Touch the metal part of the case to discharge any static electricity that
might be on your clothes or body.
2-1
2
NI PXIe-8101/8102 User Manual