Installation And Configuration; Installing The Ni Pxi-8119 - National Instruments PXI-8119 User Manual

Installation and Configuration

This chapter contains information about installing and configuring your
NI PXI-8119 controller.

Installing the NI PXI-8119

This section contains general installation instructions for the NI PXI-8119.
Consult your PXI chassis user manual for specific instructions and
warnings.
1.
Caution To protect both yourself and the chassis from electrical hazards, leave the chassis
powered off until you finish installing the NI PXI-8119 module.
2.
3.
© National Instruments
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Plug in your chassis before installing the NI PXI-8119. The power
cord grounds the chassis and protects it from electrical damage while
you install the module.
Remove any filler panels blocking access to the system controller slot
(Slot 1) in the chassis.
Touch the metal part of the case to discharge any static electricity that
might be on your clothes or body.
2-1
2
NI PXI-8119 User Manual