Setting The Address - Phoenix Contact Axioline E Series User Manual

UM EN AXL E SYS INST
Example:
PROFIBUS DP
34
PHOENIX CONTACT
4.6

Setting the address

The Axioline E devices have rotary coding switches for setting the address and, if required,
the transmission speed .
The rotary coding switches are located below a cover.
• Open the cover.
1
Figure 4-9 Opening the rotary coding switch cover
• Rotary coding switch S1 is used to specify the tens (X10) of the device ID
(module ID).
• Rotary coding switch S2 is used to specify the units (X1) of the device ID
(module ID).
Setting address 77 (e.g., PROFIBUS DP):
0
12
10
8
S1
Figure 4-10 Address 77
2
0
x10
2
4
6
9
8
S2
x1
2
4
6
8395_en_03