Fixing clips of the metal
device
Drill hole spacing
8395_en_03
4.5
Mounting Axioline E metal devices
There are two options for mounting the metal devices. You can:
–
Screw the device to the extendable fixing clips
–
Mount the device using a mounting plate
4.5.1
Mounting metal devices using extendable fixing clips
A fixing clip is located on the back of the metal device at the top and bottom.
•
Extend the fixing clips.
•
Screw the device directly onto a flat mounting surface using the fixing clips.
Figure 4-4
Extending the fixing clips of the metal device
Please refer to the diagram below for the drill hole spacing.
30
Figure 4-5
Drill hole spacing
Mounting Axioline E devices and connecting cables
31
PHOENIX CONTACT